|
|
Low-energy semidetached family house
Štefanik, Jan ; Hudec, Mojmír (referee) ; Sedlák, Jiří (advisor)
The bachelor´s thesis deals with the processing of project documentation low-energy semidetached family house in Panenská Rozsíčka vilage. The project as well as the addenda are aleboreted wit regard to contemporary, legislature and standards. The family house is situated on a plot of 2510/16 in the cadastral Panenská Rozsíčka. The family house is designed as a single storey building with not basement, roof bow and attic. Dimensions of the house are 13,15 x 11,4m. The roof of the house is designed bow roof. The building is designed from the systém Porotherm. The base structure consists of a plain concrete C 20/25 and steel-concrete of 150mm is concrete C 20/25 and steel B500.
|
|
|
Family house with an establishment
Bartoš, Vít ; Berousková, Dana (referee) ; Daněk, Lukáš (advisor)
This Batchelor thesis describes the family house with establishment of the cafe. This object si located on the site number 2061/4 in Studénka. Tha family house is suitable for a family with 4 – 5 members. The house is without basement and thera are two floors. The house has 3 mono-pitched roof. The building is designed with HELUZ systém. The building is based on concrete footings. There is a wooden staircase. In the building there is a two-way support system. Heating is made by the gass boiler.
|
|
|
Low-energy family house
Venhoda, Lubomír ; Jelínek, Petr (referee) ; Sedlák, Jiří (advisor)
This bachelor´s thesis focuses on the development of documentaion of a low energy detached house in Vladislav. The project as well as the addenda are elaborated with regard to contemporary legislature and standards. The house is located on plot number 500/51 in Vladislav area. The house has two floors. Dimensions of the house are 13,1x8,35m. The roof of the building is designed saddle roof. The house is performed from the systém Porotherm. The base structure consists of a plain concrete C20/25 concrete base slab thickness of 150 mm. The enclosed essay deals with the topic of wall circuit systems.
|
|
|
Detached house with a workshop
Hrubeš, Tomáš ; Majsniar, Michal (referee) ; Kolář, Radim (advisor)
The subject of the bachelor's thesis is the preparation of project documentation for the construction of a detached house. The object is located in the town of Drahobuz in a flat terrain, and it is conceived for families of four members. The family house is designed as a stand-alone, one-floor, partly made cellar, with a attic. There is also a workshop of PC servis in the house. The main entrance is at the level of the 1st floor located to northl. The main rooms are oriented to the south. Vertical structures are made of ceramic blocks. The ceiling construction is made of bricks with miako inserts and ceramic concrete joists. The detached house is topped by a gabled roof. The project was prepared using the computer program ArchiCAD. When processing, the emphasis was put on the correct layout, architectural solutions, static requirements and safe use of the building.
|
|
|
Family house
Latochová, Marcela ; Gábrová, Lenka (referee) ; Spáčil, Miroslav (advisor)
The bachelor´s thesis a Family house is compiled in a form of project documentation which comprises all the requisites required by current regulations. The designed family house is placed on the sites numbered 2132/1 in a village Úvalno. This is a new building partial basement with one underground and aboveground floors. The house has an irregular floor plan, is built from the systém SUPER IZO from BS Klatovy. The house is covered with a double-flat roof and on the part and flat green walkway roof.
|
|
|
Timber House
Machala, Tibor ; Osička, Jan (referee) ; Lavický, Miloš (advisor)
This bachelor thesis is focused on design of the new family house with one flat unit and an establishment serving as a wine bar of the house owner. House is located in the cadastral territory Horní Věstonice. It is two-storey family house with basement for four member family. The perimeter structures of the basement are made from blocks of CSB 400 lost formwork, insulated with extruded polystyrene ISOVER STYRODUR 2800 C in thickness 100mm. Above-ground perimeter structures are made from wooden posts (50x140mm) axially distant 625mm. The spaces between the posts are filled with thermal isolation ISOVER ORSIK and covered by the SDK rigistabil 15.0. The walls are isolated with facade polystyrene ISOVER EPS 100F in thickness 100mm. Horizontal construction above 1S is made of inserts GARPET VST20 and GARPET 175 GPN beams from CS BETON. Horizontal construction above 1NP is made of wooden planks placed on a stand with gratification and the lid. The building is roofed by a saddle roof with a 30 ° tilt. The terrace at level 1NP is made of wooden construction. The staircase is wooden, partially curved. Entrance to the land and to the family house is from the south side, to the wine bar is entrance on the north side. On the north side of the land is designed parking place for four cars. Bachelor thesis is elaborated in the form of project documentation for construction.
|
|
|
Návrh rodinného domu s variantami řešení dřevěného schodiště
Kopeček, Jan
The topic of the bachelor thesis is the suggestion of a spacious family house and focus on the possibilities of staircase. It is a wooden building with a diffuesly open system with gable roof. The building is designed as a non-cellar with residental attic. The staircase is designed of wooder stair type and wooden from walnut. For heating the house is considered underfloor heating which will be connected to the heat pump type „earth/water – borehole“. Part of the bachelor thesis is drawing documentation, which contains description and composition of structures. The composition of the structures are verified in terms of thermal transmission. Staircase design, views and drawings of staircase parts are part of the bachelor thesis and drawing documentation.
|
|
|
Timber House
Machala, Tibor ; Osička, Jan (referee) ; Lavický, Miloš (advisor)
This bachelor thesis is focused on design of the new family house with one flat unit and an establishment serving as a wine bar of the house owner. House is located in the cadastral territory Horní Věstonice. It is two-storey family house with basement for four member family. The perimeter structures of the basement are made from blocks of CSB 400 lost formwork, insulated with extruded polystyrene ISOVER STYRODUR 2800 C in thickness 100mm. Above-ground perimeter structures are made from wooden posts (50x140mm) axially distant 625mm. The spaces between the posts are filled with thermal isolation ISOVER ORSIK and covered by the SDK rigistabil 15.0. The walls are isolated with facade polystyrene ISOVER EPS 100F in thickness 100mm. Horizontal construction above 1S is made of inserts GARPET VST20 and GARPET 175 GPN beams from CS BETON. Horizontal construction above 1NP is made of wooden planks placed on a stand with gratification and the lid. The building is roofed by a saddle roof with a 30 ° tilt. The terrace at level 1NP is made of wooden construction. The staircase is wooden, partially curved. Entrance to the land and to the family house is from the south side, to the wine bar is entrance on the north side. On the north side of the land is designed parking place for four cars. Bachelor thesis is elaborated in the form of project documentation for construction.
|
|
|
Detached house with a workshop
Hrubeš, Tomáš ; Majsniar, Michal (referee) ; Kolář, Radim (advisor)
The subject of the bachelor's thesis is the preparation of project documentation for the construction of a detached house. The object is located in the town of Drahobuz in a flat terrain, and it is conceived for families of four members. The family house is designed as a stand-alone, one-floor, partly made cellar, with a attic. There is also a workshop of PC servis in the house. The main entrance is at the level of the 1st floor located to northl. The main rooms are oriented to the south. Vertical structures are made of ceramic blocks. The ceiling construction is made of bricks with miako inserts and ceramic concrete joists. The detached house is topped by a gabled roof. The project was prepared using the computer program ArchiCAD. When processing, the emphasis was put on the correct layout, architectural solutions, static requirements and safe use of the building.
|
|
|
Low-energy semidetached family house
Štefanik, Jan ; Hudec, Mojmír (referee) ; Sedlák, Jiří (advisor)
The bachelor´s thesis deals with the processing of project documentation low-energy semidetached family house in Panenská Rozsíčka vilage. The project as well as the addenda are aleboreted wit regard to contemporary, legislature and standards. The family house is situated on a plot of 2510/16 in the cadastral Panenská Rozsíčka. The family house is designed as a single storey building with not basement, roof bow and attic. Dimensions of the house are 13,15 x 11,4m. The roof of the house is designed bow roof. The building is designed from the systém Porotherm. The base structure consists of a plain concrete C 20/25 and steel-concrete of 150mm is concrete C 20/25 and steel B500.
|
guest ::
